LED Tape Lights

LED tape light connector for easy lighting installations. Create simple, and secure connections with 8mm wide tape light. Features For 8mm LED t...

TAPEGUARD is the easiest way to provide a decorative protection for indoor tape light installations and create an attractive and finished look. Fea...

3M high-bond double-sided adhesive tape designed to install the SLIM Channel on a flat, indoor surface. Features Size: 4 ft. x 0.75 in Documents...

Secure Channel to flat surface with this pressure-fit clip. Features Finish: Steel 1 Pack includes 2 clips / 4 screws Documents Spec Sheet

Used to install Channel in a vertical orientation and includes an Allen key and allen screws for securing to a vertical surface. Features Finish: ...

Features 8mm window connector attaches two sections of AVENUE 24, BLAZE & FLUID VIEW Tape Light Dimensions Length: 0.6" Width: 0.5" Height: ...

Features 8mm window connector attaches AVENUE 24, BLAZE & FLUID VIEW Tape Light directly to plug-in adapter / DC plug accessory Dimensions L...

Features 8mm window connector attaches AVENUE 24, BLAZE & FLUID VIEW Tape Light directly to a hard-wired connection Wire: UL 2464 20/2 AWG D...

Features 8mm window connector attaches two sections of AVENUE 24, BLAZE & FLUID VIEW Tape Light together. Wire lead allows for turns around ti...

LED tape light connector for easy lighting installations. Create simple, and secure connections with 8mm wide tape light. Features For 8mm size LE...

Features For 12mm LED tape light (LED tape light sold separately) Voltage: 12-24V Clear plastic construction Fast and easy installation Small f...

Features For 12mm LED tape light (LED Tape light sold separately) Voltage: 12-24V Clear plastic construction Fast and easy installation Small f...

TAPEGUARD is the easiest way to provide a decorative protection for indoor tape light installations and create an attractive and finished look. Fea...

Features 10mm connector attaches two sections of DAZZLE RGB Tape Light Dimensions Length: 0.6" Width: 0.55" Height: 0.2" Documents Spec Sheet

Features 14mm window connector attaches two sections of DAZZLE RGBW Tape Light Dimensions: 0.6"L x 0.75"W x 0.2"H Dimensions Length: 0.6" Width...

Features 10mm connector attaches DAZZLE RGB Tape Light directly to a hard-wired connection. Wire: UL 2464 20/4 AWG Dimensions Length: 3", 24", 4...

Features 14mm window connector attaches DAZZLE RGBW Tape Light directly to a hard-wired connection Wire: UL 2464 20/5 AWG Dimensions Length: 3",...

Features 10mm connector attaches two sections of DAZZLE RGB Tape Light. Wire lead allows for turns around tight corners. Wire: UL 2464 20/4 AWG ...

Features 14mm window connector attaches two sections of DAZZLE RGBW Tape Light. Wire lead allows for turns around tight corners Wire: UL 2464 20/...

Features Converts a wet location 10.5mm plug to a hard-wired connection (1 male & 1 female wet location plug) Wire Color: White Dimensions ...

Features Attaches a wet location 10.5mm plug to a male DC accessory or plug-in adapter (not rated for wet location environments). Gender specifica...

Features Creates an extension between wet location 10.5mm plugs. Male to female extension. Dimensions Length: 6", 12", 24" Diameter: 0.41" Do...

The Wet Location Splice Connector Pairs allows you to connect two, three, or five non-linear LED light fixtures to a single power source. Features ...

Features Wet Location Strip Light Mounting Clips Labels:

Features Easy to use Resistant to water Perfect for wet or outdoor environments Documents Instruction Sheet Labels:

Features Flex Strip Cutter Documents Spec Sheet

Features Length: 72" AVX Splice Cable Documents Spec Sheet

Features Mounting Clips Dimensions Length:1.97" Width: 1.3" Documents Spec Sheet

Features Cable Strain Relief Documents Spec Sheet

Features Termination Cap Documents Spec Sheet

Features Terminal end piece Dimensions: 0.75"L x 0.6"W x 0.48"H Documents Spec Sheet Instruction Sheet Labels:

Features Connects two pieces of HYDROLUME X together Documents Spec Sheet Instruction Sheet Labels:

Features Creates a jumper between two pieces of HYDROLUME SLIM Strip Light Length: 4", 6", 12", 24" Documents Spec Sheet Instruction Sheet Lab...

Features Connects two pieces of HYDROLUME SLIM together Documents Spec Sheet Instruction Sheet Labels:

Features Connects HYDROLUME SLIM to a power supply. Refer to Installation Guide for further information. Wire Length: 6" Documents Spec Sheet I...

Features Connects three pieces of HYDROLUME SLIM together Documents Spec Sheet Instruction Sheet Labels:

Features Connects four pieces of HYDROLUME SLIM together Documents Spec Sheet Instruction Sheet Labels:

The Waterproof RGB Solder Connector helps you adapt your waterproof RGB plugs to a bare wire connection for connection to an RGB color controller. ...

Features Type: End Cap Set Sold in 5-Pack(5 open and 5 closed) Documents Instruction Sheet